Discrete metric and topology

From Maths
Revision as of 23:34, 23 July 2015 by Alec (Talk | contribs)

Jump to: navigation, search

Metric space definition

Let [ilmath]X[/ilmath] be a set. The discrete[1] metric, or trivial metric[2] is the metric defined as follows:

  • [math]d:X\times X\rightarrow \mathbb{R}_{\ge 0} [/math] with [math]d:(x,y)\mapsto\left\{\begin{array}{lr}0 & \text{if }x=y \\1 & \text{otherwise}\end{array}\right.[/math]

However any strictly positive value will do for the [ilmath]x\ne y[/ilmath] case. For example we could define [ilmath]d[/ilmath] as:

  • [math]d:(x,y)\mapsto\left\{\begin{array}{lr}0 & \text{if }x=y \\v & \text{otherwise}\end{array}\right.[/math]
    • Where [ilmath]v[/ilmath] is some arbitrary member of [ilmath]\mathbb{R}_{> 0} [/ilmath][Note 1] - traditionally (as mentioned) [ilmath]v=1[/ilmath] is used.

Note: however in proofs we shall always use the case [ilmath]v=1[/ilmath] for simplicity

Open balls

The open balls of [ilmath]X[/ilmath] with the discrete topology are entirely [ilmath]X[/ilmath] or a single point, that is:

  • [math]B_r(x):=\{p\in X\vert\ d(x,p)<r\}=\left\{\begin{array}{lr}\{x\} & \text{for }r\le 1\\ X & \text{otherwise}\end{array}\right.[/math]

By definition [math]B_r(x):=\{p\in X\vert\ d(x,p)<r\}[/math] note that for:
  • [ilmath]r\le 1[/ilmath] we have [ilmath]B_r(x)=\{x\}[/ilmath] as
    • [ilmath]d(x,p)< r \le 1[/ilmath] so [ilmath]d(x,p)<1[/ilmath] only when [ilmath]x=p[/ilmath], as if [ilmath]x\ne p[/ilmath] then [ilmath]d(x,p)=1\not<1[/ilmath] (proof by contrapositive)
  • [ilmath]r> 1[/ilmath] we have [ilmath]B_r(X)=X[/ilmath] as
    • [ilmath]d(x,y)\le 1[/ilmath] always, so we have [ilmath]\forall x,y\in X[d(x,y)\le 1< r][/ilmath] so [ilmath]\forall x,y\in X[d(x,y)< r][/ilmath] thus the ball contains every point in [ilmath]X[/ilmath]

This completes the proof

Open sets

The open sets of [ilmath](X,d_\text{discrete})[/ilmath] consist of every subset of [ilmath]X[/ilmath] (the power set of [ilmath]X[/ilmath]) - this is how the topology induced by the metric may be denoted [ilmath](X,\mathcal{P}(X))[/ilmath]

Every subset of [ilmath]X[/ilmath] is an open set


Let [ilmath]A[/ilmath] be a subset of [ilmath]X[/ilmath], we will show that [ilmath]\forall x\in A\exists r>0[B_r(x)\subseteq A][/ilmath]
  • Let [ilmath]x\in A[/ilmath] be given
    • Choose [ilmath]r=\tfrac{1}{2}[/ilmath]
      Now [ilmath]B_r(x)=\{x\}\subseteq A[/ilmath]
      • This must be true as we know already that [ilmath]x\in A[/ilmath] (to show this formally use the implies-subset relation)
    • We have shown that given an [ilmath]x\in A[/ilmath] we can find an open ball about [ilmath]x[/ilmath] entirely contained within [ilmath]A[/ilmath]
  • We have shown that for any [ilmath]x\in A[/ilmath] we can find an open ball about [ilmath]x[/ilmath] entirely contained within [ilmath]A[/ilmath]

This completes the proof


Discrete topology

The discrete topology on [ilmath]X[/ilmath] is the topology that considers every subset to be open. We may write [ilmath]X[/ilmath] imbued with the discrete topology as:

  • [ilmath](X,\mathcal{P}(X))[/ilmath] where [ilmath]\mathcal{P} [/ilmath] denotes power set

TODO: find reference - even though it is obvious as I show above that every subset is open



Related theorems

Notes

  1. Note the strictly greater than 0 requirement for [ilmath]v[/ilmath]

References

  1. Introduction to Topology - Theodore W. Gamelin & Robert Everist Greene
  2. Functional Analysis - George Bachman and Lawrence Narici