RealQ16s:Provisional instruction listing/Opcode table/1 byte instructions

From Maths
< RealQ16s:Provisional instruction listing‎ | Opcode table
Revision as of 22:18, 12 February 2016 by Vivien Bonnet (Talk | contribs) (Adding MOVACO instruction)

Jump to: navigation, search
Range Operation bits Distinct
opcodes
Comment Caveats
0000 0000 NOP 0000 0000 x1 Does nothing
0000 0001 (unused) 0000 0001 (x15 opcodes)
... ... ...
0000 1111 (Unused) 0000 1111
0001 0000 MOV r1,r2 0001 r1 r2 x12 Store r1 in r2, treating them both as 16 bit registers r1 and r2 must be different
... (Unused) 0001 0000 x1
(Unused) 0001 0101 x1
(Unused) 0001 1010 x1
0001 1111 (Unused) 0001 1111 x1
0010 0000 PUSH r1 0010 00 r1 x4 Push the 16 bit register r1
0010 0100 POP r1 0010 01 r1 x4 Pop the 16 bit register r1
0010 1000 MOV b1,r1L 0010 10 r1 x1024 (x4) 16 bit instruction 0010 10r1 vvvv vvvv - move byte b1 given by v into low byte of register r1
0010 1100 MOV b1,r1H 0010 11 r1 x1024 (x4) 16 bit instruction 0010 11r1 vvvv vvvv - move byte b1 given by v into high byte of register r1
0011 0000 MOVACO b1,r1L 0011 00 r1 x1024 (x4)11 16 bit instruction 0010 11r1 vvvv vvvv - move byte b1 given by v into low byte of register r1, then clear high byte of register r1. 0011 0100